Art Clay Silver Acrylhars transparant - Padico UV-LED Curing Resin Star Drop Hard - 30g

Acrylhars transparant - Padico UV-LED Curing Resin Star Drop Hard - 30g
Artikelnummer:
ACUV001
Verkoopseenheid:
per flesje
Beschikbaarheid:
Op voorraad (4)
product-banner
€16,95
Incl. btw

Padico UV-Led-resin transparante acrylhars hardt uit bij blootstelling aan ultraviolette straling.
Padico UV-Led-resin is een niet-giftige sieradenhars, geurloos en heel eenvoudig aan te brengen.
Wordt in een handig flesje met tuitmond geleverd zodat je het direct op je ondergrond kunt druppelen. De resin hardt in slechts enkele seconden uit onder een UV (Led) Lamp.

Droogtijden:
30-90 seconden onder een UV-Led lamp
2-4 minuten onder een traditionele UV lamp
30-90 seconden onder zonlicht (bij mooi weer)
3-10 minuten onder zonlicht (bij bewolkt weer)

Voor speciale effecten kun je de resin mixen met glitters of pigmenten. Je kan de hars ook gebruiken voor het vereeuwigen van gedroogde bloemetjes, kraaltjes, steentjes of persoonlijke herinneringen.

 

 

  • A one-component resin that cures with both UV-LED light (405 nm) and UV light (365 nm).
  • Does not turn yellow over time *, and maintains a crystal-like transparency.
  • UV-LED light is an ultra-fast curing type that starts curing in about 1 to 2 seconds and cures in about 30 to 90 seconds.
  • Water resistant and durable finish after curing.
  • Not only soft molds, but also silicone molds can be used for beautiful finishes.
  • It cures well even in sunlight.
  • Beautiful finish with less stickiness after complete curing.
  • It can be used as a transparent mold or as a surface coating agent.
  • Discoloration peculiar to resin may occur due to deterioration over time.


Irradiation advice

Star drops can be cured with either LED light or UV light.
When using an LED light, the wavelength of the LED must be either "405nm" or "365nm".
The dedicated light "UV-LED smart light" is equipped with these two wavelengths, so you can use it with confidence.

Curing time

  • UV-LED light (when using 6W to 9W) 30 to 90 seconds
  • UV light ( when using 36W ) 2 to 4 minutes
  • Sunlight ( when using fine weather) 30 to 90 seconds
  • Sunlight (when using cloudy weather ) 3 to 10 minutes (depending on the thickness of the work and the season)
  • If colored, irradiate for longer than the above time.


Ontdek gelijkaardige producten en/of meer uitleg over dit product door te navigeren naar de hoofdcategorie van dit product:
0 sterren op basis van 0 beoordelingen Je beoordeling toevoegen
Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »